I. Description TD-ERM1 epoxy grouting material comprises A (resin), B (hardener), C (filler) three-component, the product of high quality resin and purification filler, 100% solids, non-human harmful solvents and other volatile substances. At room temperature will be using a three-component material contained in each thoroughly mixed after without adding additional ingredients. Second, the use of 1, susceptible to chemical attack of equipment foundation repair. 3, track foundation, bridges and other support base by a strong pressure area reinforced repair. 4, bolts, rebar planting and structural concrete construction reinforcement. 5, concrete, stone, steel, wood and other surfaces as a self-leveling mortar use. 6, iron, iron rods, rod steel connections. Third, the product features 1, high strength, early strength: it can provide greatly superior mechanical properties of cement-based materials, compression, adhesion, etc., higher early strength. 2, low exothermic peak: it can provide up to 120 minutes (25 ℃) of operating time, suitable for large volume use grout 3, no shrinkage: ensure that the final shape of the grout layer in full contact with the bearing surface, ensure the installation of high-precision equipment degrees. 4, excellent creep resistance: epoxy mortar can be long at -50 ℃ to + 160 ℃ alternately freezing and thawing, vibration compression harsh physical conditions of long-term use without plastic deformation, to ensure long-term accurate positioning equipment. 5, excellent toughness: epoxy mortar can be resolved by the moving device to transmit any possible cement-based grout layer burst dynamic load. 6, corrosion resistance: can withstand acid, alkali, salt, oil and other chemicals, long-term contact corrosion.